Essex Electrical & Construction, Inc.

To remove a circuit breaker, follow these simple tips:
1) Locate the electrical service box in your house.
2) Shut off the main breaker within the box and remove the panel covering the breakers.
3) Test the wire going to the circuit breaker you are replacing and make sure the power is off at that location. This can be done with an inexpensive circuit tester.
4) Unscrew and pull out of the way the feed wire going to the circuit breaker you are replacing. There should be only one black wire going to the breaker unless you have a multiple pole breaker or a very high amp rating on the breaker.

LINK

Do you want to be an electrician? An electrician’s salary is not that bad. In fact, you’ll be able to live comfortably if you take this career path. Salaries of electricians vary from state to state and from country to country. Companies may also pay their electricians Chicago Electricians differently. You can expect a higher than average salary as an electrician. The following are some of the things you should do in this line of work.: Electricians are professionals. Be prepared to spend three to five years of training and internship. This profession requires you to also take a test for your license.

LINK

Toolboxes are wonderful things, every time I do anything around the house I find myself reaching for my toolbox. I store the toolbox in the garage with all of the tools that I could ever need inside. This saves a lot of time when I am trying to do a number of different projects. If you keep your toolbox well stocked and somewhere that it’s easy to get to then it can make your life a lot easier when you want to do any home renovation projects by yourself. Toolboxes are required for all types of home owner.
Toolbox
The most important part of the toolbox is actually the toolbox! You need to buy a high quality toolbox so that it will last for a long time and keep all of your tools as safe as possible. There are wooden, metal or even plastic tool boxes. I now have a fancy toolbox which looks amazing!

LINK

LINK

Every home has electricity flowing through it and normally safe however, if you have young children or are planning to do work on you home, you must make sure you have some basic electrical safety training and electrical safety rules. Electricity is a part of modern society however without the proper precautions electricity can kill very easily. This article will give you some very basic electrical safety tips. Small children love to learn by exploring and touching. Parents and caregivers must diligently remove any electrical hazards in their home and keep their children safe. First remove or repair any loose electrical lines. If you have loose electrical sockets or frayed wires protruding from the wall, you should have the issues fixed by a trained electrician. You can easily find one on the Internet. Also, replace any frayed power cords on electrical appliances you use. In some cases you can have a frayed power cord repaired but you should also consider replacing the appliance completely.

LINK

Electricians maintain electrical systems for residential homes and businesses. Most electricians specialize in doing work in construction or maintenance. But anymore more and more people are doing both types of work. Electricians More Electricians test, install and maintain electrical systems for many purposes. Such as climate control, communications and security. Electricians also do work in business and industry. Electricians have to follow the proper building codes when installing electrical systems.

LINK

There are certain questions that we should ask an electrician to make our home more safe and save money at the same time. An electrician is very knowledgeable about all electrical items and wiring in your home. When you have a electrician More Chicago Electricians over to work on a job in your home, remember to ask a few questions while he is there about the electricity in your home and how it works. He may be able to give you some tips and pointers about your electricity and home to save you money and make your home a safer place for you and your family to live. One question you should ask your electrician is how safe the electrical wiring is in your home. And is there anything that you can do to improve the electrical safety in your home. The electrical wiring in your home is very important in making your home a safe place to live.

LINK

BEFORE you hire an… electrician. Our how to hire videos help you with contractor tips, in 17 different fields including electrical tips.

LINK

Electrical outlet replacement is a job that some homeowners may not feel comfortable doing themselves. The fact is, though outlet or switch replacement is a relatively straightforward job, dealing with your home’s electrical wiring is intimidating for a reason. The threat of electric shock and the future threat of electrical fire are both pretty scary, and doing this task improperly can have serious consequences. This job can certainly be done by a do-it-yourselfer, but if you’re not sure what you are doing, it is usually best left to an expert.
Electrical Outlet Replacement
With outlets, it’s helpful to know what type is most appropriate in different situations. Do you need a GFI (also called GFCI, short for ground fault circuit interrupter) Chicago Electrical Services outlet or will a regular 120-volt receptacle do? Exterior, kitchen and bathroom outlets should be protected by a GFI to guard against electrocution. Does the outlet need to be grounded? Knowing the answers to these questions is important if you plan on doing the job yourself.

LINK

Some tips for handling an electrician’s snake (”fish tape”)
The fish tape, or snake, is an important tool Electrician Services for everything from pulling wires through a pipe to fishing wires from one end of a house to the other above a ceiling in an attic or up several floors through a plumbing chase. One of the first challenges the novice snake-user encounters is unrolling the snake. I’m actually planning on doing a separate instructable-tip for that process. But suffice it to say that you need to hold onto it VERY TIGHTLY and carefully walk out the entire length of the snake (stepping on it as you do so to keep it from sproinging out of control) and then re-coil it with a much larger diameter. Secure the larger coil by wrapping one end around the coil thru the center of it several times so that it locks against itself.

LINK

Some electrical problems you might encounter are best left to a professional. If you need an electrician, consider these tips:
1 Ask for recommendations. Ask friends, acquaintances, and managers and salespeople at electrical-supply stores for names of trustworthy electricians. Also check the Yellow Pages under “Electrical Contractors” or “Home Repair and Maintenance.”
2 Get more than one estimate. This is one of the easiest tips to ignore, especially if you’re busy and you have a good feeling about the first contractor More Electrical Contractors you contact, but you’d be doing so at your own financial peril. Call two or three contractors. Find out how long they’ve been in business and how much they charge, and ask for references.
3 Don’t get gouged. If you’re faced with an electrical emergency and you must find help through the Yellow Pages, request a flat-rate price so you can get quotes from several contractors and establish the job’s cost.

LINK

Perhaps the biggest tip I can offer is to plan for plenty of circuits. The cost of a 40 circuit panel vs. a 30 circuit panel is peanuts. Two hundred fifty feet of 12 / 2 cable with ground is peanuts. Anticipate what the load for a circuit might be and if in doubt, simply add another circuit to a room addition or house. Heck, add two more! Consider using 12/2 wire as your minimum wire size. I did that in my own home after years of frustration working at other people’s homes More Contractors. I could notice a voltage drop at some houses when I used my power tools. I quickly learned that I was at the end of a long stretch of 14 gauge wire. Fourteen gauge wire supports 15 amps or 1,800 watts. But 12 gauge wire is rated for 20 amps or 2,400 watts. That is a significant difference.

LINK

Tools:
voltage tester
miniature slotted screwdriver
slotted screwdriver
wire cutters
Steps:

1. Turn off power to the outlet at the breaker box. Use a voltage tester to make sure the power is off (figure A).

2. Remove the faceplate and the screws holding the outlet in the junction box with the slotted screwdriver. Gently turn the outlet until it is oriented properly.

3. Check all wires to make sure no copper wiring is exposed. If you can see a gap between the end of the insulation and the outlet (figure B), remove the wire with the miniature screwdriver and trim the exposed wiring using the wire cutters.

4. Insert the wire back into the outlet and tighten it so the insulation fits flush against the back of the outlet (figure C).

5. Replace the outlet and secure with screws. Replace the faceplate and turn the power back on.

LINK

While most states license electrical and plumbing contractors, only 36 states have some type of licensing and registration statutes affecting contractors, remodelers, and/or specialty contractors. The licensing can range from simple registration to a detailed qualification process. Also, the licensing requirements in one locality may be different from the requirements in the rest of the state.

LINK